Bathroom cleaning and maintenance knowledge - bathroom, cleaning and maintenance, knowledge

1. Cleaning When cleaning the four walls and bottom of the shower room, please use a soft dry cloth. If there is slight dirt, please use a soft cloth or sponge dipped in neutral detergent to clean it. When removing stubborn dirt, please use alcohol to remove it. When using the bathroom special detergent, please be sure to use it correctly according to the precautions stated on its container. Wrong use will have adverse effects on the human body, and it is easy to cause some bad conditions in the product. Do not use the following items for cleaning: acid, alkaline solvents, medicines (such as hydrochloric acid), solvents such as acetone thinner, decontamination powder, etc., otherwise it will have adverse effects on the human body and cause some bad conditions on the product. 2. How to use and maintain the pulley of the shower room 1. There are two ways of sliding block and sliding wheel for sliding shower door. 2. Problems that should be paid attention to in the use of pulleys and sliders: 1. It is to avoid impacting the movable door with force below, so as not to cause the movable door to fall off; 2. It is to pay attention to regularly cleaning the sliding rails, pulleys, and sliding blocks, and adding lubricant (lubricating). Oil or lubricating wax); 3. It is to adjust the adjustment screw of the slider regularly to ensure the effective bearing and good sliding of the slider to the movable door. 3. Maintenance of tempered glass 1. Do not hit or hit the glass surface with sharp objects to avoid damage ; 2. Do not wipe the glass surface with corrosive liquids such as Tianna water, so as not to damage the surface luster; 3. Do not wipe the glass surface with rough materials to avoid scratches. 4. Maintenance of aluminum alloy frame electrostatic spraying products (referring to solid spraying products such as white, bone color, blue, color, red, purple, etc.); Photosensitive reaction will occur, causing the spray layer to fade; secondly, it cannot be wiped with corrosive liquids or materials; thirdly, the surface cannot be wiped with rough materials (including toothpaste), and fourthly, the surface cannot be painted with sharp objects.