How to maintain the mirror in the bathroom-bathroom mirror, bathroom

Mirrors are afraid of moisture, so try to place them in a dry place. However, the bathroom mirror filled with moisture is inevitably contaminated with moisture, and it will deteriorate and appear black spots after a long time. When maintaining your bathtub, basin and other large bathroom accessories, don't forget to maintain your mirror. A mirror that is as clean as new will tell you the secrets of beauty. Why is the mirror afraid of moisture? Mirror glass is generally cut before use. Water vapor can easily enter the mirror surface from the side cut by the glass knife, corrode the mirror surface, and produce mildew and rust spots. Therefore, you might as well put a layer of paint on the side of the mirror after you buy it back, and also apply a layer on the back.

The following are the mirror cleaning methods collected by Xiaobian: 1. Do not touch the mirror with wet hands, and do not wipe the mirror with a damp cloth to avoid adding moisture; 2. The mirror cannot be touched To salt, grease and acidic substances, these substances are easy to corrode the mirror surface; 3. The mirror surface should be wiped with a soft dry cloth or cotton to prevent the mirror surface from being rubbed; 4. Use a soft cloth or emery cloth, dipped in some kerosene or wax to wipe ; 5. Wipe the mirror and frame with a rag dipped in milk to make it clear and bright; 6. Before bathing, apply soap to the mirror surface, and then wipe it with a dry cloth, a layer of soap film will be formed on the mirror surface, which can prevent the mirror surface from blurring. ; 7. Use a dry rag dipped in an appropriate amount of detergent to apply to the mirror surface and spread evenly. The active ingredients contained in the cleaning spirit can effectively prevent water vapor from condensing on the mirror surface, and can play a good anti-fog effect; 8. You can also use astringent lotion or detergent; 9. Wipe with oil-absorbing tissue , the effect is good. At present, there are anti-fog mirrors on the market, mainly coated anti-fog mirrors and electric heating anti-fog mirrors. The former prevents the fog layer through the coating pores; the latter increases the humidity of the mirror surface through electric heating, and the fog evaporates quickly, so that the fog layer cannot be formed. This kind of mirror is very valuable. In terms of material, mirrors are divided into two categories: aluminum mirrors and silver mirrors. When we choose mirrors, we try to choose silver mirrors as much as possible. The mercury density is high, it is easy to fit closely with the glass, it is not easy to get water and damp, and it can be used for a long time. At present, most of the waterproof mirrors on the market are silver mirrors.