Lassic style corian bathroom sinks supply for table tops

KKR Solid surface freestanding bathtub is another one kind of products of solid surface sanitary material. Made from resin, ATH, pigment and auxiliary agent, solid surface freestanding bathtub is also same as solid surface sink and solid surface basin.Solid Surface Freestanding Bathtub is modern bathtub. It is different from the Ceramic bathtub, which is not well popularly applied at the market and will disappear sooner and sooner. As there is some tiny seam on the Ceramic Bathtub surface, which could accumulate the bacteria, viruses and it is also easy to crack and hard to repair as crack or there is some scratch on the surface.Solid Surface Freestanding Bathtub is different from steel bathtub. Steel Bathtub is made of Steel slab and the surface will be enameled. KKR Solid Surface Freestanding Bathtub is casts and made by mold, so it is real solid and no need to be enameled after took off from the mold.Solid Surface Freestanding Bathtub is also different from Enameled Cast Iron bathtub. Enameled cast iron bathtub is sturdy, low abrasion resistant, hard to install, move, also its cost is always high. Solid Surface Bathtub is light weight, easy to install, abrasion resistant and could be easily maintained or repaired as there is some scratch marks on the surface. Also its cost is cheaper.Our Solid Surface Freestanding Bathtub is made from well resin, ATH, pigment and auxiliary agent. So the Solid Surface Freestanding Bathtub is at good quality. It is really solid, smooth surface, hygienic, non-absorbing, chemical resistance, scratch resistance, stain resistant, anti-bacterial. So it is easy to maintain, renew and repair.even there is some stain or scratch mark on the surface, could be removed by wet pad or sanded by wet sanding paper and polished, then the acrylic bathtub will look like new one. Different from some bad quality solid surface freestanding bathtub, which actually made from Calcium and just glaze the surface with gel coat.The gel coat calcium bathtub is cheaper, but it is can’t be chemical resistance as calcium will be damaged by the shower shampoo, so after some time, the calcium will become bacterial, viruses accumulated. And if there is some stain or scratch mark, it also will hard to be removed, as the sanding or polishing will wipe away the surface gel coat, then there will be no protection from outside, the gel-coat bathtub will become worse and worse.Because of the excellent performance of Solid Surface Freestanding Bathtub, it is wildly used and welcomed. And we are mainly in solid surface sanitary ware products, such as freestanding tub, wash basin, shower tray, etc. We are Solid surface sanitary ware manufacturer.

Some clients may misunderstand our acrylic solid surface bathtubs and confuse them with normal acrylic bathtubs. Then they raise the question of “why your acrylic baths so expensive, even up to triple the price of acrylic solid surface bathtubs?”Actually, these two products are completely different. Hereby we list the differences of these two products to help you understand1. View of the structureNormal acrylic tubs consist of several layers, the upper layer is 3-4mm of Polymeric Methyl Methacrylate（PMMA）which also called acrylic glass and is the face of acrylic tub. Under the face or skin of the tub is the reinforced fiber glass back bonded by polyester resin, which strengthens the structure and is usually 4-5mm thick. This is why some some people prefer to call an acrylic bathtub a “fiberglass bathtub”An acrylic solid surface (stone composite) bathtub no longer has such kind of layers. The product is solid throughout whole body, as its name ”solid surface” demonstrates., It is made with a kind of non porous composite stone material which was first introduced by Dupont in 1960s and proven and accepted by the market for more than 30 years.Normally an acrylic solid surface bathtub’s body is approx 1.8-2.5cm thick and unlike a thin acrylic tub’s fragile structure, it’s very durable. If taken good care of, a fine quality solid surface acrylic bathtub can be used for several decades.2.Base material difference3.The acrylic tubs are made of 4mm PMMA slabs, strengthened by reinforced fiber glass. Acrylic solid surface bathtub‘s base material are premium acrylic resin (compound of PMMA and MMA) and fine quality aluminum powder.3. Different production methodTo make an acrylic tub, one of the main methods is the plastic suction technique processing with acrylic slabs heated to 120-150 degrees centigrade. After cooling down, the required shape will be formed and then a reinforced fiber glass layer will be built to strengthen the shape.Acrylic resin (MMA) is taken to produce a solid surface bathtub, where it is mixed with aluminum powder thoroughly in a cast machine. The mix is then placed into a vacuum, poured into a mold, and after cooling down the mold is opened and a primary acrylic solid surface bathtub is created.4. Other prominent differenceWe hope above the words can help you learn the differences between acrylic tubs and acrylic solid surface baths. Our products are only acrylic solid surface bath ware of the greatest quality.

The solid surface is solid non porous material with high density, it is resistant to most stains from food, cooking oil, sauce, vinegar, iodine, and so on. Because of its durability and low-cost easy maintenance, it is widely used for home and commercial application, like the kitchen countertop, vanity top, dining table, bar counter, kitchen island, and so on. And solid surface a renewable and repairable surface material, solid surface allows you to relish in the ease of day-to-day maintenance and long-lasting durability.Not only is it resistant to stains, solid surface requires no surface sealants so it effortlessly maintains its brilliance over time.

With matte surfaces becoming increasingly popular in our homes, more of us are turning to solid surface bathtubs for their smooth silky finish. But what are solid surfaces? Are they practical, how do you clean them, and how much maintenance is required? What is a Solid Surface Bathtub?Solid Surface bathtubs are formed by mixing a mineral compound with acrylic, epoxy or polyester resins. This makes them very strong and durable and gives them a natural stone-like feel. While usually finished as a matte white surface, solid surface bath tubs are also available in a range of colors and finishes. You may also hear Solid Surface products referred to as stone resin, acrylic stone, composite stone, cast stone, mineral stone or engineered stone. Most people would agree that a freestanding solid surface bathtub looks great. It enhances the look of the decor of your bathroom and helps to make your floors stand out. For a few examples, take a look at our KKR-B003, KKR-B008, KKR-B048, and many others! The Benefits of solid surface bathtubsUnlike Ceramic, the surface of a solid surface bathtubs is not brittle or fragile, making them very difficult to crack or break. This makes them a very durable and long-lasting alternative. Solid surfaces bathtubs has good insulation，can keep the water warmly within one hour.Stain resistance, anti-fungal, environment-friendly, these features makes the solid surface bathtubs are hot popular on the markets.   How to Clean your Solid Surface Bathtub - The first step is to make sure the floor around your bathtub stays dry. Simply wipe up any standing water after your bath or shower. On top of daily drying around the base of your tub, it is recommended that you clean the surface of your freestanding bathtub once a week. Only clean with a sponge or cloth. Don’t use coarse cloths or scouring pads as they can damage the finish of your solid surface bathtub. Some people choose to use old newspapers to clean their tubs.- Rinse the tub with warm water after each use; wipe with a soft cloth for best results. Choose mild, nonabrasive cleaning solutions. Avoid products and solutions that are abrasive (such as rough sponges) or contain acid or ammonia. - It is recommended that you use a mild detergent and water for the cleaning. Don't use any cleaner that has an abrasive cleaning agent. Also, be careful of the chemicals in many commercial cleaners. The chemicals in the cleaners can make the surface of your bathtub lose its luster.