KKR Solid Surface - Custom solid surface manufacturer & acrylic solid surface sheet factory over 19 years

Polishing Technology for decorating stone surface

by:KKR Solid Surface     2019-12-20
Although polishing is a fine deep processing technology of solid surface sheets, the polished stone surface shows a smooth flatness, but under a certain magnification, some rough surfaces can still be seen, distinguishable scratches or microcracks (Grain)Or micro depression (Pit). Among them, the rough surface is the microscopic convex-concave surface of the stone, and the slight scratch is the trace left in the stone processing process, especially the high-hardness polishing powder higher than the stone hardness is most likely to leave the microscopic scratch on the stone surface. Microcracks may be native, which is related to the quality of stone; It may also be epigenetic, that is, it is produced during processing, because Stone is, after all, a hard and brittle material. Micro depression (Pit) It may be native or epigenetic, which is caused by grain peeling during stone processing. In order to reduce the diffuse reflection of light and improve the gloss of the stone, it is usually done on the surface of the Stone (Plating)Upper layer cover (Film). It is usually coated with wax and also coated with resin or silica gel. From this point of view, the coating treatment of the solid surface sheets is called the brightening technology of the stone surface. 1) Several principles of stone surface coating treatment, namely: beautiful, durable, harmless and pollution-free. The so-called durability mainly refers to the stability after surface coating treatment. That is, Stone will not undergo obvious physical and chemical changes during normal processing, sales and use. Of course, durability is not equal to permanence. For example, if you apply wax, the surface of the stone may turn yellow over time--Oxidation of wax, or gradual loss of luster. This kind of stone is often used in the decoration of home floor, so it should be waxed and maintained frequently. In recent years, a new crystal hardness treatment technology for stone surface is to grow a layer of crystal on the surface of the original natural stone by means of artificial synthesis of crystal, thus playing a role of covering, and the effect is very good. Harmless and pollution-free means that it cannot cause harm to stone processing, packaging, transportation, installation and users, and cannot pollute the environment. Otherwise, the significance of stone surface coating treatment will be lost. 2) The meaning of solid surface sheets coating treatment, coating a layer of cover on the surface of the stone, not simply to cover the stone surface, depression (Pit) , Cracks and scratches, improve the gloss of the stone, but also protect the stone from water or other adverse factors, such as SO2 and other harmful gases on the stone erosion, avoid or delay the occurrence and development of stone surface oxidation, thus playing a protective role. From this point of view, the coating treatment of the solid surface sheets belongs to the fine protection technology of stone. Coupled with the artificial improvement of natural inferior stone, stone cleaning and maintenance, sealing and other technologies, a marginal discipline related to Stone, namely stone chemical industry, is booming.
The global market was valued at solid surface supplier in solid surface supplier and is expected to reach a market value of solid surface supplier by solid surface supplier, with a CAGR of solid surface supplier during the forecast period.
Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is solid surface in China, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.
Dongguan KKR Stone Industry Co., Ltd. must adopts new technology and internal procedures to increase responsiveness and mitigate costs going forward.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...