about creating mosaic countertops
by：KKR Solid Surface
2020-06-16
Creating real tile mosaics on almost any surface is easy.
The first step is to see what\'s in the tile shop.
Then decide the pattern you want.
There are many books, magazines and TV shows that give guidance and design ideas step by step.
After deciding on the pattern or design, draw the pattern on the surface that will be tiled.
The first step is to prepare the surface and make sure the tiles are attached.
You do this by grading the surface with a tool knife and then coating the surface with a diluted white glue mixture.
Next, you take the tile cement, often referred to as a thin sleeve or mortar, and apply a thin coating on the surface.
Place the tiles in the cement according to the pattern you draw.
After the cement is solidified ,(
Don\'t be too hasty)
Fill the gap between tiles with tile grouting.
Most people think that the grout is only white, but if you go to the hardware store and have a look, you will find that there are many Grout in different colors.
You just have to apply grouting on all the seams between the individual tiles.
Then wipe the excess part with sponge.
Have you ever been to a cafe, restaurant or a friend\'s house because of this fact to enjoy mosaic tiles on the desktop or walls?
Well, it\'s not hard to bring this look to your own home.
Where is the good place to add mosaics in your home?
The kitchen and bathroom are obvious choices, but the dining table and terrace are also a favorite.
Consider decorating the coffee table purchased from an unfinished furniture store.
It was a great week. end project.
All you have to do is add a layer of paint and then make a small mosaic on the desktop with some tiles of different sizes and even broken tiles.
The same technique applies to larger areas like this, just as it does for small accent tables.
There are a few things you should prepare for before starting this project.
Before you start laying the tiles, take the time to study what you want to do.
There are a lot of books about tiles in your bookstore or library.
One suggestion is that just go through them and get some inspiration for your design.
Once you have a basic idea of what you want to do, it\'s always a good idea to draw a sketch of your design.
You will then want to start from the center, work outward and place the actual tiles on the KKR countertop to make sure you are happy with your design.
Once you have everything ready, take a magic mark and mark the position of the wave.
Before putting the tile cement in place, you have to prepare the tiles for the mosaic section.
How did you do it?
You can get some aggression here.
Mix the tiles together, wrap them up with a towel and punch them.
This is the easiest way to get the tile pieces needed for mosaic.
You need some smaller tiles for the border mosaic.
For smaller pieces, you can use the tile bite to break the pieces according to the size you need.
To put the tile cement in place, use the mortar that you can buy at any tile shop or home improvement shop.
You just have to put the mortar on the 1/8 inch thick place.
Then rate the mortar with the edge of the spatula.
Then put your tiles in place.
For the mosaic section, you use the same process.
Take different tiles and arrange them as you like.
Try to keep the space between tiles at 1/8 inch.
How did you complete the project?
After the mortar is set or dry, you must grout the tiles.
Keep in mind that there are multiple colors for tile grouting, not just white.
Next, apply grouting to the top of the tile that fills the seam.
To clean the tiles, wipe any excess grout with a sponge.
Let it dry overnight so you can sit down and enjoy your artwork!
Huizhou KKR Stone Industry Co., Ltd.'s has been able to achieve excellent performance in an extremely competitive industry.
Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as solid surface in China of our business mission.
Many of the solid surface manufacturers listed here can be purchased for less money, but in general we recommend paying a slightly higher price for significantly improved performance. These are our top choices and their recommended configurations.
The first step is to see what\'s in the tile shop.
Then decide the pattern you want.
There are many books, magazines and TV shows that give guidance and design ideas step by step.
After deciding on the pattern or design, draw the pattern on the surface that will be tiled.
The first step is to prepare the surface and make sure the tiles are attached.
You do this by grading the surface with a tool knife and then coating the surface with a diluted white glue mixture.
Next, you take the tile cement, often referred to as a thin sleeve or mortar, and apply a thin coating on the surface.
Place the tiles in the cement according to the pattern you draw.
After the cement is solidified ,(
Don\'t be too hasty)
Fill the gap between tiles with tile grouting.
Most people think that the grout is only white, but if you go to the hardware store and have a look, you will find that there are many Grout in different colors.
You just have to apply grouting on all the seams between the individual tiles.
Then wipe the excess part with sponge.
Have you ever been to a cafe, restaurant or a friend\'s house because of this fact to enjoy mosaic tiles on the desktop or walls?
Well, it\'s not hard to bring this look to your own home.
Where is the good place to add mosaics in your home?
The kitchen and bathroom are obvious choices, but the dining table and terrace are also a favorite.
Consider decorating the coffee table purchased from an unfinished furniture store.
It was a great week. end project.
All you have to do is add a layer of paint and then make a small mosaic on the desktop with some tiles of different sizes and even broken tiles.
The same technique applies to larger areas like this, just as it does for small accent tables.
There are a few things you should prepare for before starting this project.
Before you start laying the tiles, take the time to study what you want to do.
There are a lot of books about tiles in your bookstore or library.
One suggestion is that just go through them and get some inspiration for your design.
Once you have a basic idea of what you want to do, it\'s always a good idea to draw a sketch of your design.
You will then want to start from the center, work outward and place the actual tiles on the KKR countertop to make sure you are happy with your design.
Once you have everything ready, take a magic mark and mark the position of the wave.
Before putting the tile cement in place, you have to prepare the tiles for the mosaic section.
How did you do it?
You can get some aggression here.
Mix the tiles together, wrap them up with a towel and punch them.
This is the easiest way to get the tile pieces needed for mosaic.
You need some smaller tiles for the border mosaic.
For smaller pieces, you can use the tile bite to break the pieces according to the size you need.
To put the tile cement in place, use the mortar that you can buy at any tile shop or home improvement shop.
You just have to put the mortar on the 1/8 inch thick place.
Then rate the mortar with the edge of the spatula.
Then put your tiles in place.
For the mosaic section, you use the same process.
Take different tiles and arrange them as you like.
Try to keep the space between tiles at 1/8 inch.
How did you complete the project?
After the mortar is set or dry, you must grout the tiles.
Keep in mind that there are multiple colors for tile grouting, not just white.
Next, apply grouting to the top of the tile that fills the seam.
To clean the tiles, wipe any excess grout with a sponge.
Let it dry overnight so you can sit down and enjoy your artwork!
Huizhou KKR Stone Industry Co., Ltd.'s has been able to achieve excellent performance in an extremely competitive industry.
Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as solid surface in China of our business mission.
Many of the solid surface manufacturers listed here can be purchased for less money, but in general we recommend paying a slightly higher price for significantly improved performance. These are our top choices and their recommended configurations.
Custom message
