What waterproof coating is more suitable for bathroom use-Waterproof coating, bathroom

Which waterproof coating is more suitable for the bathroom? This is what everyone has been paying attention to. In general, the leakage of water in the bathroom is caused by the details of the building. There are three places that are more likely to cause problems. We should pay more attention to these three places. These three places are the floor drain, the corner and the pipe root. These three places have many interfaces. , prone to gaps, and therefore prone to water leakage. In addition, if the interface between the bathtub drain and the drain pipe is not tight, it will be easy to create gaps and water leakage. So we should choose a coating that is more suitable for bathroom decoration, so what waterproof coating is more suitable for bathroom? Here, I will tell you about it! What waterproof coating is more suitable for bathroom waterproof coating, we should choose one-component environmental protection type Polyurethane paint, this kind of paint is the waterproof material highly recommended by the Ministry of Construction. Because this coating can tightly wrap the pipeline and the ground, penetrate into the gap, and will not shrink after drying, it is more suitable for small-area houses with many pipelines and gaps such as the bathroom than rigid materials such as waterproof cement. Therefore, customers should choose brand coatings when purchasing such coatings, and the cost of materials per square meter is about 50 to 60 yuan. It is understood that at present, some domestic brand polyurethane coating manufacturers have their own construction teams. Citizens can ask the manufacturers to provide professionals when purchasing coatings. In order to make the waterproof period longer in the future, the paint generally needs to be brushed 3 times. In order to let the paint fully dry, it is not possible to choose to do it in rainy or humid climates. Generally, the dry-through period of one-component environmentally friendly polyurethane coatings is about 3 to 4 days. Counting the one-component environmentally friendly polyurethane coating, the cement layer covering the coating and the tiles, the materials used per square meter will generally not exceed 400 yuan. In this way, for a bathroom with a size of 5 square meters, it will cost about 2,000 yuan to re-do the waterproofing, and the bathroom facilities such as bathtubs that need to be reconfigured will be counted separately. After the waterproof construction is completed, all the sewers in the bathroom should be blocked, and a 'low wall' should be built at the entrance of the bathroom to conduct a water injection test, and the water injection height should be about 20cm. Check after 24 hours. If there is no leakage on the surrounding walls and ground of the bathroom, the waterproof quality of the bathroom is very good. On the contrary, it is necessary to find out the leak and repair it. At the same time, the wall should also be waterproof. In order to achieve a better waterproof effect, the wall of the general bathroom should also be waterproofed at a height of about 30cm to prevent water from penetrating the wall. The height of the waterproof treatment on the wall adjacent to the bathtub is also higher than the upper edge of the bathtub. This will ensure that nothing goes wrong.