the author: kkrsolidsurface setting wall date: 2020 - 09 - 07 source: TV setting wall marble manufacturer focus on: 22 with the improvement of quality of life, people to be resided to the home decorate a requirement is also more and more diversified, both upscale and beautiful, more fashionable atmosphere. The sitting room TV setting wall as an important element of household style, one of the TV setting wall is decorated with marble strips and one of the most popular decorating choice, and choosing the natural texture of the stone as a TV setting wall, high-grade gorgeous and natural environmental protection. But the heavy stone, on the wall is hard to fixed, need careful construction. Next to you recommend 【 Dry hanging stone setting wall 】 Installation process method: 1. First need to the positioning of the processing line at the grass-roots level setting metope processing at the local level. Treatment method and the construction of brick wall were similar, ensure clean, no aggradation, float ash metope, have good leveling and coating moistureproof layer. Then, according to the construction drawings on the wall, pull the overall horizontal and vertical line. 2. Installation of fixed steel keel for the heavy marble slabs, reduce the effects of slab to metope to use steel keel, and improve the shock resistance of the whole. Construction method is according to the construction drawings, drilling in metope buried under fixed pieces, to fix on even keel. Request keel installation is firm, with metope is flat and level. 3. Install the pendant to the keel fixed steel keel, then need to be connected to the Dali to install pendant on keel. The shape of the pendant as the shape of the letter T, T the pendant to the keel, up and down in front, can hang two pieces of cut stone; At the bottom or just a piece of cut stone, used as the shape of the 7 45 ° pendant to hang li shi. 4. Install the Dali connection good fittings, then install marble slabs. Specific methods are in each piece of stone on the four horns beneath the incision, the mouth into the marble glue, and then the fitting of a card inserted into the incision fixed up and down. 5. After installation of caulking processing marble slabs, board with board between aperture using glue processing. First clean the dust impurities inside the cracks, on the edge of the plate paper paste tape to prevent pollution of viscose marble surface, glue, require glue line smooth and straight.