4 cleaning methods teach you to maintain bathroom supplies-4 cleaning methods, maintenance bathroom supplies

With the arrival of hot summer, the heat is unbearable, and the frequency of use of the bathroom increases. Shower, water, toilet, shower room and other bathing facilities are either easily damaged, or rust and water spots quickly. In these situations, how to clean and maintain them? Let's take a look with reporters. 1. Soft cloth dipped in detergent to remove limescale Brushing teeth, washing hands, shaving, the frequency of using water in summer will be very high. For a long time, the scale of the tap water will accumulate from the water nozzle, affecting the water output and the comfort of the water. To clean the faucet, you should always use a clean soft cloth dipped in detergent to gently wipe it. Never use a steel ball or a scouring pad with hard particles to clean it. The cleaning agent used in cleaning is also very particular. To remove the accumulation of water, a mild liquid non-friction liquid polish should be used. If there are stains that cannot be wiped off during use, you can also use toothpaste and a soft cloth to scrub, which can not only easily remove the stains, but also improve the gloss of the water. 2. Soft cloth dipped in toothpaste to remove water spots. As long as the utensils related to water are generally made of all-copper material, the bright silver parts above are treated with chrome plating. The main purpose of plating is decoration and rust prevention, but it does not mean It won't rust even if you don't clean it. Many shower column brands will sell their shower columns touting that they will never rust, but they are not. Some domestic shower columns will be covered with dot-like rust after less than half a year of use. In fact, this is not rust, but because the bubbles and mixed water produced by the bath liquid are stuck on the column tube. If you do not wipe it often, Color, unsightly water spots develop over time. If this happens, you can dab a soft towel with car wax, or dab a few times with toothpaste, and it will look as good as new. It is better not to use scouring pads, etc., so as not to scratch the chrome surface. 3. Use an old toothbrush dipped in vinegar to brush the shower door Glass is different from copper, and water spots should be treated in different ways. Usually, the water splashed on the glass is not cleaned in time when taking a bath. After a long time, there will be spots. Some people like to use Amway products to wipe, but the effect is not great. It is better to wash with a mixture of vinegar and a little salt, which can be easily removed. Or pour a little vinegar in a small container, and then take an old toothbrush dipped in vinegar to brush the shower door glass or bathroom cabinet mirror, and it will be as bright as new. 4. The sewing needle pierces the impurities in the shower hole. If some of the small holes of the shower head in your home are blocked, the water outlet will be scattered, which will affect the comfort of bathing. This is actually the fault of limescale. In this case, you need to put water first, and see which hole is blocked; then open the shower head and see that there are a lot of small holes in it, use a needle to pierce the small hole that you just saw without water with a needle. impurities in the pores until there are no impurities in the pores. This method is more direct, but be careful to puncture the shower hole.