Bathroom mirror maintenance skills - bathroom, mirror

Why are mirrors afraid of moisture? Mirror glass is generally cut before use. Water vapor can easily enter the mirror surface from the side cut by the glass knife, corrode the mirror surface, and produce mildew and rust spots. Therefore, you might as well put a layer of paint on the side of the mirror after you buy it back, and also apply a layer on the back. The following are the mirror cleaning methods collected by Xiaobian: Maintenance tips for bathroom mirrors 1. Do not touch the mirror with wet hands, and do not wipe the mirror with a damp cloth to avoid adding moisture; 2. The mirror should not come into contact with salt, grease and Acidic substances, these substances are easy to corrode the mirror surface; 3. The mirror surface should be wiped with a soft dry cloth or cotton to prevent the mirror surface from being wiped; 4. A soft cloth or emery cloth can be dipped in some kerosene or wax to wipe; 5. Wipe the mirror and frame with milk rag to make it clear and bright; 6. Before bathing, apply soap to the mirror surface, and then wipe it with a dry cloth, a layer of soap film will be formed on the mirror surface, which can prevent the mirror surface from blurring; 7. Use dry Dip a rag with an appropriate amount of detergent and apply it to the mirror surface and spread it evenly. The active ingredients contained in the cleaning spirit can effectively prevent water vapor from condensing on the mirror surface, and can play a good anti-fog effect; 8. You can also use astringent lotion or detergent; 9. Wipe with oil-absorbing tissue , the effect is good. At present, there are anti-fog mirrors on the market, mainly coated anti-fog mirrors and electric heating anti-fog mirrors. The former prevents the fog layer through the coating pores; the latter increases the humidity of the mirror surface through electric heating, and the fog evaporates quickly, so that the fog layer cannot be formed. This kind of mirror is very valuable.