Fall in love with warm bathroom in winter, teach you to buy a bathtub - choose bathtub, massage bathtub

When choosing a bathtub, the first thing to consider is size, shape and style, and materials. The size of the bathtub depends on the size of the bathroom. A corner-mounted tub takes up more space than a normal rectangular tub, so if you like it, see if the bathroom can accommodate it. Also, bathtubs of the same size have different heights, widths, lengths and profiles. If you like the depth of the water, the position of the waste outlet should be higher. If it is too low, once the water level exceeds this height, the water will flow out from the sewage outlet, and it is difficult for the water depth of the bathtub to reach the required high level; For the disabled, it is better to choose a lower side, and you can also install a handrail in an appropriate position. Some bathtubs have skirts and some have no skirts. If you want to buy a skirt with a skirt, it is usually a one-sided skirt, and you should pay attention to the direction of the skirt. According to the position of the drain and the wall, decide whether to choose the left skirt or the right skirt. If you buy the wrong one, you cannot install it. If there is a shower head on top of the bathtub, the selected bathtub should be slightly wider to prevent water from splashing outside; the bathtub part below the shower position should be flat, and the style with anti-slip treatment should be selected to ensure safety. There are two types of shower heads: wall-mounted and wall-mounted, and the wall-mounted type is more suitable for home use. If you choose a massage bathtub, because it is flushed with an electric pump, you must check whether it meets the safety standards, and ask a professional to install it on your behalf. The shower head and accessories of the bathtub, like the toilet and basin accessories, must choose matching products. The selection of its appearance is basically the same as that of other bathroom products. The quality of the bathtub material is mainly determined by whether the surface is smooth and the hand mold is smooth. Steel and cast iron tubs, if the enamel is not well plated, will show subtle ripples. The firmness of the bathtub needs to be tested by hand and foot. The quality and thickness of the material are related to the firmness of the bathtub, which cannot be seen by visual inspection alone. You need to press and step on it in person. Installation precautions: When installing, the water should try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating. Pay attention to remove the debris in the pipeline before filling it with water. Secondly, under the condition that the water pressure is not lower than 0.02mpa, after using for a period of time, if you find that the water output decreases, or even the water heater goes out, you can gently unscrew the screen cover at the water outlet to remove Impurities can be. Do not switch the water too hard, just turn it gently. The showerhead metal hose of the bathtub should be kept in a natural stretch and should not be coiled around it when not in use. At the same time, when in use or not, be careful not to form a dead angle at the joint between the hose and the valve body, so as not to break or damage the hose. Surface cleaning: 1. Regularly use detergent to scrub and decontaminate. Before scrubbing, rinse the surface with clean water and wipe it with a soft cloth, and then gently wipe with a neutral detergent to keep the surface clean. 2. Do not use any abrasive cleaners, hard cloths, paper towels or steel balls, and any acidic, rough cleaners or soaps to wipe the surface. Filter cleaning: Remove the bubble head, take out the filter, and use a toothbrush or a small brush to wash the filter under water.