How to make the bathroom waterproof in summer-bathroom, waterproof

Which waterproof coating is more suitable for bathroom? This is a question that everyone has been paying attention to. General bathroom leaks are caused by problems in the details of the decoration. There are three places that are more prone to problems. These three places are floor drains, wall corners, and pipe roots. Because of the many interfaces, these three places are prone to gaps, so water leakage is prone to occur. Therefore, we should choose a paint that is more suitable for bathroom decoration. Prefer environmentally friendly polyurethane coatings For waterproof coatings, we should choose single-component environmentally friendly polyurethane coatings, which are currently highly recommended waterproofing materials by the Ministry of Construction. Since this coating can tightly wrap the pipes and the ground, penetrate into the gaps, and will not shrink after drying, it is more suitable for small areas such as bathrooms with more pipes and gaps than rigid materials such as waterproof cement. Therefore, when purchasing such coatings, brand coatings should be selected, and the material cost per square meter is about 50 to 60 yuan. The paint is brushed 3 times for dry construction. It is understood that some domestic brand polyurethane paint manufacturers have their own construction teams. Citizens can ask the manufacturers to provide professionals when purchasing paints. In order to make the waterproof period longer in the future, the paint generally needs to be brushed 3 times. In order to let the paint fully dry, it is not possible to choose to do it in rainy or humid climates. Generally, the dry-through period of one-component environmentally friendly polyurethane coatings is about 3 to 4 days. Counting the one-component environmentally friendly polyurethane coating, the cement layer covering the coating and the tiles, the materials used per square meter generally do not exceed 400 yuan. In this way, for a bathroom with a size of 5 square meters, it will cost about 2,000 yuan to re-do the waterproofing, and the bathroom facilities such as bathtubs that need to be reconfigured will be counted separately. After the construction is completed, do the water injection test. After the waterproof construction is completed, all the sewers in the bathroom should be blocked, and a low wall should be built at the door of the bathroom for the water injection test. The water injection height is about 20 cm. Check after 24 hours. If there is no leakage on the surrounding walls and ground of the bathroom, it means that the waterproof quality of the bathroom is very good. On the contrary, it is necessary to find out the leak and then repair it. At the same time, the wall should also be waterproof. In order to achieve a better waterproof effect, the wall of the general bathroom should also be waterproofed about 30 cm high to prevent water from penetrating the wall. On the wall adjacent to the bathtub, the height of the waterproof treatment is higher than the upper edge of the bathtub. This will ensure that nothing goes wrong.