The installation of gas water heaters requires scientific laying of pipes-installing gas water heaters, laying pipes scientifically

Recently, a series of unfortunate incidents have occurred in which the safety of gas water heaters has been compromised due to the unauthorized installation of water heater pipes by gas water heater users. In order to ensure the safety of consumers, relevant departments and major media have jointly organized various safety knowledge publicity activities. At the same time, Macro reminds consumers: Be sure to ask professionals to install gas water heaters and lay gas pipelines scientifically. The laying of gas pipelines is the premise for consumers to use gas water heaters safely and with confidence. It is understood that gas-fired water heaters will produce harmful gases such as carbon monoxide during use. Correctly installing the exhaust pipe can discharge these gases outdoors to ensure the personal safety of users. If the smoke exhaust pipe is not laid, or the pipe leaks due to improper laying, the harmful gas will remain in the bathroom, which may cause the user to suffocate and threaten the user's safety. According to Macro's technical staff, to install a gas water heater, you must first select a gas pipeline that meets the specifications. The gas connection pipe must use a special gas rubber pipe (the length should be less than 3 meters, and the joint should be fastened with a clamp), aluminum-plastic pipe or galvanized. Steel pipes and water connection pipes should be pressure-resistant and temperature-resistant water pipes such as PPR pipes, and water control valves should be installed. The smoke exhaust pipes must be made of stainless steel or other heat-resistant and corrosion-resistant materials. The second is to install the smoke exhaust pipe. The smoke exhaust port should lead to the outdoor ventilation place, and do not lead the smoke exhaust port to the indoor, building ventilation duct and public flue. In addition, when installing a gas water heater, you should fully check the gas joints, gas pipes and hoses for air leakage. If there is air leakage, you must reinstall the pipes, or replace the intact gas pipes and hoses. When installing gas water heaters, scientific laying of gas pipelines can avoid many tragedies and enable consumers to use gas water heaters safely and with confidence.