The opening in the wall to share aluminum sheet and aluminum veneer

The opening in the wall to share aluminum sheet and aluminum veneer difference is 1. Metope aluminum plate installation nodes share the opening in the wall aluminum sheet and aluminum veneer difference between 2. If it really is very thin aluminum plate, the area of each piece of aluminum sheet and is very big, is indeed need a base plate, or you will not level off. The opening in the wall to share aluminum sheet and aluminum veneer difference like this, is uneven. Aluminum panel, stiffener behind, do not need base plate theory, and so thick, the thickness can be used on the outdoor walls. The opening in the wall share aluminum sheet and aluminum veneer difference between aluminum veneer refers to after dealing with the chromium and so on, then USES the fluorine carbon spraying technology, building decoration materials processing. Fluorocarbon coatings mainly refers to the poly (vinylidene fluoride resin ( KANAR500) , primer, paint, varnish, three. Share the opening in the wall thickness of aluminum sheet and aluminum veneer difference between aluminum plate is put in 0. Here more than 2 mm to 500 mm and 200 mm width, length less than 16 m aluminum material called aluminum plate or aluminium material, 0. For aluminum under 2 mm, 200 mm width for row material or material (within With the progress of large equipment, of course, the most wide can do 600 mm aluminum plate is also more) 。 Aluminum plate is made of aluminum rolling processing and rectangular plates, divided into pure aluminum plate, aluminum alloy, aluminium sheet, aluminium plate, decorative pattern aluminum plate. Aluminum veneer its structure is mainly composed of panel, stiffener and Angle code and other parts. Forming the largest workpiece size is 8000 mm x 1800 mm ( L×W) Coating by the United States PPG, Valspar Valspar, Holland akzo Nobel AkzoNobel, South Korea KCC, well-known brands such as coating, coating can be divided into two a baked, three with two roast, the coating performance reach AAMA ( The American association of construction industry) And ASCA building painting association, USA) AAMA2605 - 98 standard. Conventional thickness: 1. 5毫米,2。 0毫米,2。 5毫米,3。 0mm。 Commonly used specifications: 600 * 600 mm, 600 * 1200 mm aluminum sheet and aluminum sheet so still have very big distinction, they are not the same.